Image:Maximum thermometer close up 2.JPG
A mercury-in-glass thermometer is a thermometerconsisting of mercuryin a glasstube. Calibrated marks on the tube allow the temperatureto be read by the length of the mercury within the tube, which varies according to the temperature. To increase the sensitivity, there is usually a bulb of mercury at the end of the thermometer which contains most of the mercury; expansion and contraction of this volume of mercury is then amplified in the much narrower bore of the tube. The space above the mercury may be filled with nitrogenor it may be a vacuum
A special kind of mercury thermometer, called a maximum thermometer, works by having a constriction in the neck close to the bulb. As the temperature rises the mercury is pushed up through the constriction by the force of expansion. When the temperature falls the column of mercury breaks at the constriction and cannot return to the bulb thus remaining stationary in the tube. The observer can then read the maximum temperature over a set period of time. To reset the thermometer it must be swung sharply. This is similar to the design of a medical thermometer.
Mercury will solidify (freeze) at -38.83 °C(-37.89 °F) and so may only be used at higher temperatures. Mercury, unlike water, does not expand upon solidification and will not break the glass tube, making it difficult to notice when frozen. If the thermometer contains nitrogen the gas may flow down into the column and be trapped there when the temperature rises. If this happens the thermometer will be unusable until returned to the factory for reconditioning. To avoid this some weather services require that all mercury thermometers be brought indoors when the temperature falls to -37 °C (-34.6 °F). In areas where the maximum temperature is not expected to rise above -38.83 °C (-37.89 °F) a thermometer containing a mercury-thalliumalloymay be used. This has a solidification (freezing) point of -61.1 °C (-78 °F).
The thermometer was used by the originators of the Fahrenheitand Celsiustemperature scales.
Anders Celsiusdevised the Celsius scale, which was described in his publication the origin of the Celsius temperature scale in 1742.
Celsius used two fixed points in his scale: the temperature of melting ice and the temperature of boiling water. This wasn't a new idea, since Isaac Newtonwas already working on something similar. The distinction of Celsius was to use the melting temperature and not the freezing temperature. The experiments for reaching a good calibration of his thermometer lasted for 2 winters. By performing the same experiment over and over again, he discovered that ice always melted at the same calibration mark on the thermometer. He found a similar fixed point in the calibration of boiling water vapour(when this is done to high precision, a variation will be seen with atmospheric pressure). At the moment that he removed the thermometer from the vapour, the mercury level climbed slightly. This was related to the rapid cooling (and contraction) of the glass.
The air pressure influences the boiling point of water. Celsius claimed that the level of the mercury in boiling water is proportional to the height of the barometer.
When Celsius decided to use his own temperature scale, he chose to set the boiling point of pure water at 0 °C (212 °F) and the freezing point at 100 °C (32 °F). One year later Frenchman Jean Pierre Cristin proposed an inverted version of the scale with the freezing point at 0 °C (32 °F) and the boiling point at 100 °C (212 °F). He named it Centigrade .
Finally, Celsius proposed a method of calibrating a thermometer:
- Place the cylinder of the thermometer in melting pure water and mark the point where the fluid in the thermometer stabilises. This point is the freeze/thaw point of water.
- In the same manner mark the point where the fluid stabilises when the thermometer is placed in boiling water vapour.
- Divide the length between the two marks into 100 equal pieces.
These points are adequate for approximate calibration but both vary with atmospheric pressure. Nowadays, the triple pointof water is used instead (the triple point occurs at 273.16 kelvins, 0.01 °C).
Today mercury thermometers are still widely used in meteorology, however in other usage they are becoming increasingly rare, as mercury is highly and permanently toxicto the nervous systemand many countries have banned them outright from medicaluse. Some manufacturers use a liquid alloy of gallium, indium, and tin, galinstan, as mercury replacement.de:Quecksilberthermometer
fr:Thermomètre et tensiomètre à mercure
ro:Termometru din sticl? cu mercur
Categories: Thermometers| Meteorology
This article is licensed under the GNU Free Documentation License.
It uses material from the http://en.wikipedia.org/wiki/Mercury-in-glass+thermometer Wikipedia article Mercury-in-glass thermometer.